How To Fill A Paintball Tank With An Air Compressor?

Are you a paintballer who’s been playing for quite some time? Have you ever considered investing in an air compressor? Well, if this sounds familiar, our latest article can solve all your problems. Today we’ll focus on how to fill a paintball tank with an air compressor.

Your first step is to ensure that your marker is empty. You also did this with all other markers before you started filling so that it didn’t get messy.

Next, place the mouth of your tank over the opening of the compressor and make sure that there are no leaks. If there are any small holes in the seal, use duct tape to cover them up, and make sure that your tank is completely secure on top of the compressor’s nozzle.

Your air compressor will need to run for a few minutes until your marker has been completely evacuated through its barrel and valve system. We will discuss the step-by-step guide in this article.

Different Types of Paintball Tanks

The paintball tank is a vital component of your paintball gun. It provides the air pressure that propels the paintballs from your gun toward your target.

You can find many different types of paintball tanks, and it cannot be challenging to know what type you need.

Air Source Tanks

Air source tanks are the most common type of paintball tank available on the market today. They use compressed air to power your gun, allowing you to refill them easily. Air source tanks are great for beginners owing to their affordability and ease of maintenance.

However, they can only hold around 3000-5000 shots before they need recharging, which means you’ll have to stop playing mid-game to get another tank if you’re running low on ammo!

Nitrogen Source Tanks

Nitrogen is an alternative source of compressed air used by many advanced players due to its longer lifespan than traditional compressed air tanks.

Nitrogen tanks are often used in high-end tournament paintball guns because they allow you to play for long periods without stopping and recharging your tank every few minutes.

If you want an efficient way of carrying more paintballs without having to refill or constantly carry around as much gear, then nitrogen tanks are a good option!

Related Post: How To Aim With A Paintball Gun?

Step-by-Step Guide to Refilling Your Tank

There are a lot of different paintball tanks out there, but they all have one thing in common: they will run out of air. This guide will walk you through refilling your paintball tank using an air compressor.

If there’s one thing every paintball player knows, it’s that filling a paintball tank is a necessary task. The good news is that it’s relatively easy to do once you know how. 

In this guide, we’ll walk through a step-by-step guide on refilling your paintball tank with an air compressor.

Step # 1: Find Out Tank PSI

The first thing to do when you want to fill your paintball tank with an air compressor is to find your tank’s pressure. Look at the back of the paintball gun, where there should be a sticker with this information. If there isn’t one, look on the side of the tank, and there should be a sticker mentioning this information.

Step # 2: Attach to the Fill Nipple

The next step is attaching your air compressor hose to the fill nipple on your paintball marker. You need to ensure that this is done correctly because if not, there could be serious consequences, such as breaking off the full nipple or, even worse, blowing yourself up! So take your time here and ensure everything is connected properly before moving on to step 3.

Step # 3: Slowly Fill the Tank

When filling a paintball tank with an air compressor, you’ll need to ensure that both gauges are in sync. While one shows that your tank is full, the other will indicate how much air is remaining in your tank. When both gauges show full, you can stop filling the tank.

Step # 4: Watch BOTH Gauges

After filling your paintball marker’s air tank with air from an air compressor, watch both gauges for a few minutes. If one gauge indicates that the tank is full, but the other shows that there’s still room for more air, you’ll need to continue filling until both gauges read full.

Step # 5: Prevent a Hot Fill

When you have finished filling your tank, ensure it is not hot when you put it back on your gun. If it is hot, the pressure inside could increase, causing damage to your gun or even causing an explosion. To ensure this does not happen, ensure that the lid of your tank is facing upwards when you put it back onto your gun and wait until the pressure has dropped back down before firing again.

Step # 6: Release the Pressure

Once you have refilled your tank, you will need to release its pressure. To do this, unscrew the front cap of your tank and release the pressure by pressing the button on top of it. If you don’t release all of the air pressure, it could cause damage to your paintball gun.

Step # 7: Detach the Hose

Once the tank is filled, you need to detach it from the compressor and then turn on the valve again to release all pressure from the tank. You should hear a hissing sound when you turn on the valve. The valve should be turned off once you hear it.

Related Post: How to Fill a Paintball Tank?

Step to Fill A Paintball Tank with An Air Compressor

Filling up a paintball tank with an air compressor is relatively simple. By doing it correctly, you can protect your tank.

Listed below are some tips for filling your paintball tank properly:

Find a Safe Location 

The first step is finding a safe location to fill your tank. You don’t want to avoid doing this in your garage or driveway because of the mess likely to be created in case of an accident.

Instead, try finding an empty parking lot or other open space with nothing around it that could get damaged by flying paintballs.

Make Sure the Tank Is Off and Unpressurized

Secondly, make sure the tank is turned off and unpressurized. You don’t want to fill up your tank while it’s pressurized because this could cause a lot of damage or even injury.

Get the Right Adapter for Your Tank

There are different adapters available depending on what kind of marker you have. If you need help deciding which one to get, check out your marker’s manual or contact your local store for help. Make sure that whatever adapter you get fits tightly into both ends of the hose before using it — otherwise, it could come loose while filling up your tank!

Connect Everything Carefully

Once you have everything connected properly, please turn on the air compressor and let it run for about five minutes before filling up the tank (this will help ensure there aren’t any leaks in either part of your setup).

How To Open The Valve To Refill The Tank

We all know that paintball is a fun activity, but there are some basic things that you need to know before you start playing. One of these things is how to open a valve to refill your paintball tank.

To open the valve to refill the paintball tank, follow these instructions:

• Remove the air tank from your marker.
• You can remove the top cap of the tank by unscrewing it from the marker.
• An air tank valve can be found at the bottom. Locate it by looking for a small hole in the center of one side of your tank. Your paintball tank will be refilled here.
• Once you have located the valve, press down on it until it opens up and begins to allow paintballs into your marker’s hopper (the container where they are stored before they are shot out).
• Fill up your hopper with as many balls as it can hold (usually one hundred), then close off your tank by pushing down on its valve again to seal off any remaining holes until you are ready to shoot again or run out of ammo altogether!

Disconnect The Air Compressor And Paintball Tank

If you are not experienced with air compressors, we recommend using a professional to disconnect the air compressor and paintball tank.

Before doing anything else, ensure that the air compressor is shut off and unplugged from its power source. If you were to accidentally plug it back in while it was still connected to the paintball tank, there would be an explosion.

Next, you must disconnect the hoses from both sides of the compressor and paintball tank. These connections can be tricky and require muscle power to loosen up. You may also need serious leverage to turn some of these fittings. A crowbar or pipe wrench would work well for this purpose.

Once all of the hoses are removed from both sides of the compressor and paintball tank, it should be relatively easy to pull them apart by hand if they need to be secured together. The two pieces should separate without effort once they are no longer connected via hoses or fittings.

Related Post: How To Paint A Paintball Mask?

Tools and Equipment To Fill A Paintball Tank With An Air Compressor?

In order to achieve your goals, you will need the following tools and equipment:

Air compressor

An air compressor is essential for filling paintball tanks because it allows you to control how much pressure goes into them. It also allows you to release excess pressure when needed. You can use an electric or petrol-powered compressor if you want, but we recommend using a petrol-powered one as they’re easier to use and cheaper in the long run.

Hose

A hose should be attached between your paintball tank and your compressor so you can fill it up quickly and easily without disconnecting anything first.

Paintball tank

You will also need a paintball tank with a pressure regulator. Make sure that this regulator matches the pressure coming from your air compressor. You should be able to find this information on the label on your regulator or in the manual for your particular brand of paintball gun.

Final Verdicts

Now that you know the steps to fill a paintball tank with an air compressor and have all the tools ready, you can move on to the actual filling of your tank.

You can start at any point from here, but it is recommended that you first read through this entire article before attempting to fill your tank, as you will learn tips along the way which will be useful as you fill your tank.

Frequently Asked Questions